? 1n5615gp thru 1n5623gp vishay semiconductors formerly general semiconductor document number 88522 www.vishay.com 28-feb-02 1 glass passivated junction fast switching rectifier reverse voltage 200 to 1000 v forward current 1.0 a patented* maximum ratings & thermal characteristics ratings at 25c ambient temperature unless otherwise specified. 1n 1n 1n 1n 1n parameter symbols 5615gp 5617gp 5619gp 5621gp 5623gp units * maximum repetitive peak reverse voltage v rrm 200 400 600 800 1000 v * maximum rms voltage v rms 140 280 420 560 700 v * maximum dc blocking voltage v dc 200 400 600 800 1000 a * maximum average forward rectified current 0.375" (9.5mm) lead length at t a =55c i f(av) 1.0 a * peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 50 a typical thermal resistance (1) r ja 45 c/w *operating junction and storage temperature range t j ,t stg -65 to +175 c electrical characteristics ratings at 25c ambient temperature unless otherwise specified. 1n 1n 1n 1n 1n parameter symbols 5615gp 5617gp 5619gp 5621gp 5623gp units maximum instantaneous forward voltage at 1.0a v f 1.2 v maximum dc reverse current t a =25c 0.5 at rated dc blocking voltage t a =100c i r 25 a *maximum reverse recovery time at i f =0.5a, i r =1.0a, i rr =0.25a t rr 150 250 300 500 ns typical junction capacitance at 4.0v, 1mhz c j 25 pf notes: (1) thermal resistance from junction to ambient at 0.375? (9.5mm) lead length, p.c.b. mounted *jedec registered values features plastic package has underwriters laboratories flammability classification 94v-0 high temperature metallurgically bonded construction cavity-free glass passivated junction capable of meeting environmental standards of mil-s-19500 fast switching for high efficiency 1.0 ampere operation at t a =55c with no thermal runaway high temperature soldering guaranteed: 350c/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension mechanical data case: jedec do-204ac, molded plastic over glass body terminals: plated axial leads, solderable per mil-std- 750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.015 oz., 0.4 g 0.034 (0.86) 0.028 (0.71) dia. 0.140 (3.6) 0.104 (2.6) dia. 0.230 (5.8) 0.300 (7.6) 1.0 (25.4) min. 1.0 (25.4) min. dimensions in inches and (millimeters) * glass-plastic encapsulation technique is covered by patent no. 3,996,602 and brazed-lead assembly by patent no. 3,930,306 do-204ac (do-15)
1n5615gp thru 1n5623gp vishay semiconductors formerly general semiconductor www.vishay.com document number 88522 2 28-feb-02 ratings and characteristic curves (t a = 25 c unless otherwise noted) ambient temperature ( c) fig. 1 ? forward current derating curves average forward rectified current (a) fig. 3 ? typical instantaneous forward characteristics instantaneous forward voltage (v) instantaneous forward current (a) percent of rated peak reverse voltage (%) instantaneous reverse current ( a) fig. 4 ? typical reverse characteristics fig. 5 ? typical junction capacitance number of cycles at 60 h z reverse voltage (v) fig. 2 ? maximum non-repetitive peak forward surge current junction capacitance (pf) fig. 6 ? typical transient thermal impedance t, pulse duration (sec.) typical thermal impedance ( cw) peak forward surge current (a) 25 50 75 100 125 150 175 0 0.25 0.5 0.75 1.0 1 10 100 0 10 20 30 40 50 60 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 0 20 40 60 80 100 0.01 0.1 1 10 20 1 10 100 1 10 100 0.01 0.1 1 10 100 0.1 1 10 100 t j = 125 c t j = 25 c 0.375" (9.5mm) lead length resistive or inductive load t j = 75 c t a = 55 c 8.3ms single half sine-wave (jedec method) pulse width = 300 s 1% duty cycle t j = 25 c t j = 25 c f = 1.0mh z vsig = 50mvp-p
|
